Mb logo white

MacBrothers Mechanical LLC

Maintenance Agreements

Maintain Your HVAC System with Our

Home Comfort Club

Thirteen years ago, I started an air conditioning and refrigeration business. My twin brother, already six years into his construction company, had the idea of joining our businesses under one roof. In 2021, MacBrothers Mechanical LLC was born, finally bringing over 25 years of combined experience in commercial and residential service together as one family-owned business.

Since then, we’ve been growing fast, adding new customers to our service network—what we like to call “additions to the family.” From Raleigh, Fayetteville, Durham, and Cary to the North Carolina coast and as far west as Charlotte, we’ve provided top-notch customer service for residential and commercial installations, service, and maintenance of all types of HVAC and refrigeration systems.

We service all makes and models. Whether it’s a recognizable name like Carrier, Trane, Lennox, Goodman, Coleman, Rheem, or any other brand, we can help. Our technicians are also well-versed in more complex systems, from geothermal to mini-splits.

Our goal is simple: to earn your trust through high standards of work, keeping our word, and offering honest pricing with great service. We believe this community deserves an HVAC company that values integrity over the bottom line.

Inquire Today

Our Plans Include:

Inspect Disconnect

Inspect Fuse Block in Disconnect

Inspect Bearings & Oil for Outdoor Motor

Inspect Ductwork

Inspect Temperature of Outdoor Motor

Inspect Thermostat Wire

Inspect & Test Defrost Controls

Compressor Capacitor Load Test

Fan Capacitor Load Test

Compressor Amps Test

Condenser Fan Motor Amps

Load Run Amps

Inspect Outdoor Coil (Cooling)

Replace Customer Supplied Filter(s)

Inspect Thermostat Operation

Inspect Fuses

Inspect Fan Blade

Inspect Contactor

Inspect Start Components

Inspect Schrader Valve Caps

Inspect Blower Motor

Inspect Indoor Blower Wheel

Inspect Blower Cabinet

Visually Inspect Indoor Coil

Inspect Ductwork at Air Handler

Inspect Outdoor Coil

Inspect Air Flow

Inspect Air Quality

Inspect Temperature

Safety Switches

Outdoor Temperature Next to Unit

Suction PSI Refrigerant Pressures

Liquid PSI

Drain Line

Check Voltage/Amperage to Compressor

Check Voltage/Amperage to Fan Motor

Inspect Motor Capacitor

Inspect Secondary Drain Pan

Inspect Drain Pan Switch

Test Zone Board

Inspect Control Board

Temperature Split at Plenum/Elbow

Return Temperature at Indoor Return Grill

Supply Temperature at Indoor Register

Run & Test System

Check Furnace Pressure Switch

Inspect Heat Exchanger for Cracks/Openings

Check Static Pressure Across Return & Supply

Check Temperature Rise

Check & Adjust Gas Pressure

Our Plans

VIP Plan

This program is designed for HVAC units 10-15 years old.

This plan protects homeowners’ new HVAC investment through the labor & manufacturer warranty. This plan also optimizes the HVAC system’s efficiency and ensure the homeowner can maximize utility savings all year.

This plan also includes a 10% discount on certain minor parts that assists homeowners when they are hit with unexpected labor & parts costs. Homeowners can rest easy knowing that these costs have been accounted for!

More Details

It Pays to be a Member 100% Buy-Back Program Benefits:

  • Priority emergency service (during office hours only)
  • No overtime rate on labor for repairs
  • 10% discount on all replacement parts listed: Overloads, thermocouples, thermostat, reversing valve, relays, electronic controls, contactors, circuit boards, blower motors, capacitors, blower shaft & wheel, h & low-pressure switches, start devices, blower bearings, gas valve, controls, pilot burner, condenser fan motors, expansion valves, transformers
  • Spring 45-point A/C tune-up
  • Clean condensing coil
  • Check operating pressures with gauges
  • Filter feplacement (customer supplied)
  • Check & tighten all electrical connections
  • Provide a tune-up check list & report on unit
  • Clear drain line with nitrogen
  • Fall 45-point furnace/heat pump tune-up
  • Total furnace/heat pump inspection
  • Test all safety controls
  • Filter replacement/customer supplied
  • Clean & adjust burners/gas pressure
  • Provide tune-up check list & report on unit

Gold Plan

This program is designed for HVAC units 10-15 years old.

This plan protects homeowners’ new HVAC investment through the labor & manufacturer warranty. This plan also enables [[8]] to optimize the HVAC system’s efficiency and ensure the homeowner can maximize utility savings all year.

This plan also includes a 10% discount on certain minor parts that assists homeowners when they are hit with unexpected labor & parts costs. Homeowners can rest easy knowing that these costs have been accounted for!

More Details

1-2 Hrs Labor: $157.45 – $314.90 (per each occurrence)

  • Examples of labor include any minor services, rewiring 24 voltage components, balancing airflow, adjusting gas valve, checking for leaks, or any service which does not include the sale of a part or takes longer than two hours to complete.
  • **Note: Amount covered depends on how much coverage is left in homeowner protection account**

1-2 lbs of Refrigerant (Service Rates): R22/$110.00 – $220.00 & R410a/$80 – $160.00 (per each occurrence)

  • **Note: Amount covered depends on how much coverage is left in homeowner protection account**

Most minor components: Up to $250.00 (per each occurrence)

  • Examples of minor components include the capacitor, contactor, defrost boards, gas valves, drain line, relays, transformers, programmable and non-programmable thermostats, thermocouples, overloads, high and low-pressure switches, non-ECM blower & condensing fan motors, thermostat wire, batteries, fuses, up to two feet of flue pipe, and Schrader valves.
  • **Note: all parts are priced with labor cost included. Labor cost will have an estimated time for repair, which is determined by the national average time to repair. The amount covered depends on how much coverage is left in homeowner protection account**

100% of Seasonal Maintenance: $199.00 – $268.00

  • Spring 45-point A/C or heat pump tune-up
    • Clean condensing coil
    • Check operating pressure with gauges
    • Filter replacement/customer supplied
    • Check and tighten all electrical connections
    • Provide a tune-up check list & report on unit
    • Total furnace inspection
    • Test all safety controls
    • Filter replacement/customer supplied
    • Clean & adjust burner assemblies
    • Provide a tune-up check list & report on unit
  •  **Note: Amount covered depends on how much coverage is left in homeowner protection account, also homeowner will have a Limited Buy-Out (50% of remaining balance) on a new system at the end of the Contract**
  • ***Also up to $193.98 of any miscellaneous fees, i.e., truck fee, torch fee, solder fee, trip to supply store, stocking fee, overtime rates, or anything that is absorbed into the cost of doing day to day business. This is a non-redeemable item.

Platinum Plan

This program is designed for HVAC units 15+ years old and units with an estimated 2-3 years of life where replacement is imminent.

This plan protects homeowners’ new HVAC investment through the labor & manufacturer warranty. This plan also enables [[8]] to optimize the HVAC system’s efficiency and ensure the homeowner can maximize utility savings all year.

This plan also includes a 10% discount on certain minor parts that assists homeowners when they are hit with unexpected labor & parts costs. Homeowners can rest easy knowing that these costs have been accounted for!

More Details

1-4 hrs Labor: $157.45 – $629.80 (per each occurrence)

  • Examples of labor include any minor services, rewiring 24 voltage components, balancing airflow, adjusting gas valve, checking for leaks, or any service which does not include the sale of a part or takes longer than four hours to complete.
  • **Note: Amount covered depends on how much coverage is left in homeowner protection account**

1-4lbs of Refrigerant: R22/$110.00 – $440.00 and R410a/$80 – $320.00 (per each occurrence)

  • **Note: Amount covered depends on how much coverage is left in homeowner protection account**

Most Minor components: up to $250.00 (per each occurrence)

  • Minor components include the capacitor, contactor, defrost boards, gas valves, drain line, relays, transformers, programmable and non-programmable thermostats, thermocouples, overloads, high and low-pressure switches, non-ECM blower & condensing fan motors, thermostat wire, batteries, fuses, up to two feet of flue pipe, and Schrader valves.
  • **Note: all parts are priced with labor cost included. Labor cost will have an estimated time for repair, which is determined by the national average time to repair. The amount covered depends on how much coverage is left in homeowner protection account**

100% of Seasonal Maintenance: $199.00 – $268.00 (per each year four visits)

  • Spring 45-point A/C or heat pump tune-up
    • Clean condensing coil
    • Check operating pressure with gauges
    • Filter replacement/customer supplied
    • Check and tighten all electrical connections
    • Provide a tune-up check list & report on unit
  • Fall 45-point furnace/heat pump tune-up
    • Total furnace inspection
    • Test all safety controls
    • Filter replacement/customer supplied
    • Clean & adjust burner assemblies
    • Provide a tune-up check list & report on unit
  • **Note: Amount covered depends on how much coverage is left in homeowner protection account**

Most Minor components: up to $250.00 (per each occurrence)

  • Major components include the compressor, condensing coil, thermal expansion valve or fixed metering device, evaporator coil, heat exchanger, reversing valve, or any component that requires the opening of a sealed system to atmospheric pressure, in which case the system must be vacuumed to acceptable micron levels.
  • **Note: Amount covered depends on how much coverage is left in homeowner protection account, also homeowner will have a Limited Buy-Out (100% of remaining balance minus fees) on a new system at the end of the Contract**
  • ***Also up to $456.25 of any miscellaneous fees, i.e., truck fee, torch fee, solder fee, trip to supply store, stocking fee, overtime rates, or anything that is absorbed into the cost of doing day to day business. This is a non-redeemable item.